Upgrade your Classic JYAR with our new silicone gaskets (see specs below) and a brand new high quality shock absorber.
Our new silicone is totally odorless and highly slick and "stick proof."
Instructions for upgrading your Classic JYAR.
Step 1. Remove the cap from your JYAR.
Step 2. Remove the glass core from your JYAR.
Step 3. With a butter knife-like instrument (nothing sharp that might cut you!), press the tip of your tool into the side of the gasket in the bottom of your JYAR "bottle" (the thing that holds the glass insert). Gently pry the edge of the gasket and tip it up.
Step 4. Remove the white gasket and replace it with the new black gasket included in your upgrade kit.
Step 5. Repeat these steps and remove and replace the gasket in the cap of your Classic JYAR. Note that you will find a thin "slip disk" in the cap that sits between the cap and gasket in the cap of your JYAR. Make sure to leave that disk in place when you replace your gasket.
Note: The new gaskets are a thinner than the gasket that you removed and they are of slighly smaller diameter. As a result they move around a little but that's by design.
Step 6. Replace the glass in your JYAR and it's ready for service!
Our new silicone material is low volatile, peroxide freesilicone rubber. All the ingredients used to make this product are listed in Title 21CFR 177.2600. This FDA regulation deals with rubber articles intended for repeated use in contact with food. It is Non-Toxic & Chemically Inert with an operating temperature of 450F.
You may also like
Get deals and updates
Sign up for our newsletter and get the latest deals!